Results 1 to 4 of 4
  1. #1
    Member getanet's Avatar
    Join Date
    Aug 2008
    Location
    Fargo, ND
    Posts
    643

    Trim % on HDS..i connected the pink wires

    Hey guys, I hooked up my HDS units to my Yamaha Sho. Now i did the forum search to connect the 2 pink wires under the cowl and that all works. My trim % only goes down to 40% and then max at 120% i believe. Anyways, when im trimmed 100% down it doesn't actually show im down all the way. I do have the command link (electronic gauges) that are still hooked up. Do I have to disconnect them in order for the HDS trim guage to work properly? Thanks for any help. Finally getting my new boat dialed in.
    Chris Shields

    Quantum Fishing
    All-Terrain Tackle
    Blackfish Gear
    Power Pole
    Legit Custom Rods

  2. Member
    Join Date
    May 2019
    Location
    Prairieville LA
    Posts
    164
    #2
    Do you have any pics of location of said pink wires?
    2014 Xpress X-19 Pro Yammy VMAX 175 HDPI

  3. Member getanet's Avatar
    Join Date
    Aug 2008
    Location
    Fargo, ND
    Posts
    643
    #3
    Left side (port side) just under the cowl, towards the top. had yellow tape on them
    Chris Shields

    Quantum Fishing
    All-Terrain Tackle
    Blackfish Gear
    Power Pole
    Legit Custom Rods

  4. Member
    Join Date
    May 2019
    Location
    Prairieville LA
    Posts
    164
    #4
    Thanks brother. I am offshore at the moment so will be a couple weeks before I can try it. From the research I have done it seems some people lose their analog gauge when you hook it up, some don't. I was hoping to keep both. Did you have any issue with this?
    2014 Xpress X-19 Pro Yammy VMAX 175 HDPI