1999 200 FICHIT E200FPLEEN Does this ecu use a 4 to 6 reference voltage ??? Alos I assume the red wire in the t/p senor is vref the green wire is signal and the black wire signal return, if that is correct than I should be able to back probe the greeen and black wires to set my t/p voltage is that correct??
Yes, the voltage at idle is .4 to .5 volts and WOT is 4.77.
RUSTY63 in a Shiny Green Jacket.......
Thanks I just wanted to be sure on the connections for the reading,i figured it would be simular to a car t/p. On the 5.0 motors we would set the voltage at idle as close to 1 as possible to help throttle responce does that work on these motors also??
.4 to .5
OK I dont have the holdng fixture for the flywheel how are you holding it to torque to 140lbs
Air tools
OK thats what I thought because I have no why to hold it for that much torque. Thanks ELGIN you are like calling FORD hotline only you respond sooner
Forgot to ask do you put any lube on metal rod where it rides on the plastic pivet on the t/p senor. Thanks again for all the help
Yes, lube is good.
ELGIN I didnt mean anything bad about being like FORD hotline those guys are good at what they do just like you are
I took no offence.
Thats great i hoped you didnt
Reply With Quote