Hey guys I am new to the forum. Looking for some help. I just bought a 2010 nitro z8 with a 225 pro xs on it. The boat as a 8 inch jack plate with a atlas motor jack. Took it out yesterday and as I climbing on pad the boat is leaning hard to the right. As I trim up it levels out. But as I run all my prop wash is going out the left side. The boat is practically empty other then a ultrex on the left side front and the 3 battery’s in the back. Any body had this problem? Or any ideas of what may be going on. My thoughts are the motor isn’t square to the boat or the prop is off balance. I am running a 25 pitch fury. Thanks for any help.