Am I able to connect three TI2 units via wireless? Can they all share a single Navionics card? What is the difference between wireless connection and NEMA 2000?
Thanks,
Am I able to connect three TI2 units via wireless? Can they all share a single Navionics card? What is the difference between wireless connection and NEMA 2000?
Thanks,
If I'm not mistaken, I believe only 2 Ti2 units can be connected wireless, so answer to 2nd question would be 'no'. Leaving #3 to others more knowledgeable.
No, only two Ti2s can be connected by WIFI at any given time. If you want threee units, you want (all of them to be) HDS.
NMEA2000 is a can-bus based network ment for data-packages. Typically data like depth, position, heading, enginedata etc. Mapping and sonar requires a network with higher capacity, like ethernet. Ethernet can be cable (like on HDS) or wireless (like on Ti2).
Thanks for the great (not what I wanted to hear) but great information. Much appreciated.
NMEA2000 will also share waypoints, but only waypoints newly created while all the graphs are powered on. It won't sync already created waypoints.
2020 Triton 206 Allure
Mercury 250 Pro XS 4S Serial # 2B642047
Bravo XS 22p @ 4.5" PTP
Minn-Kota Terrova 112 w/ IPilot
Lowrance Ti2 12" Console
Lowrance Ti2 9" Bow
Lowrance Point 1
Standard Horizon GX2350S
Shakespeare QC-8 Antenna