OG228318
Trying to set tps after rebuild. Seems that TPS is set at .185 right now. Manual says to set between .240-.260. But it also says that these settings are for a specific Ecu part number and above. Can not find a part number that looks remotely close to what it says in the manual. Here are the numbers I can find. When testing full throttle voltage with meter set to 20v I’m getting 7.53v manual calls for approximately 7.46v. is that close enough?
DD1CAF56-7765-4DFE-8265-A46BDEC981A1.jpeg7397CE49-3145-49FD-9868-B20495BA48BF.jpeg5BE4D247-8E05-46E6-B06E-D89E5C8B67EE.jpeg
Also about setting the timing. I still have the idle stabilization module. Is it worth disconnecting for just leave it alone? Had no idle issues before rebuild. If I remove it are there any issues with setting the timing before doing the break in? Will that have to be checked again after break in?