Cup Holder Ideas

[Commanche20]

Where did you find this one ?? Sounds like what I want to do too !!

That's what I thought about doing but couldn't bring myself to drill a hole that size in my deck

[rchavis]

On my older Stratos 201 pro I added a TM pan .Like your boat . My LCX unit is on the side like the TM ,but the other side . I was at BassProShop when they took the cup holder/ tool tray off a new Z20 boat.That owner said it had a nick in it . They sold it to me for a 1/4 of the price of a new one .
Then i went to my metal shop and the owner made me a brace , like your units are mount to for $0 . I gave him $12 for a lunch plate for the worker that put in the brake to make the bent's ....it least a 5 min job out of a piece strap SS .
Went home and drilled 4 holes to mount it to the deck and 4 holes to mount the holder and spray paint black to match .
You could do that and would not have to drill a 2-3 hole in your deck .
All the boat MFL has them for there boats now .

[barbarian]

I ended up buying some SS poker table cup holders. They have a flat piece that is used to slide under the edge of the table. I drilled 2 matching holes and stuck it under FF mount. I’ll probably put a 2nd on the other side but under the deck mount. I don’t want to drill any new holes. F1B894D0-EA8D-49AF-A265-6ABDC8392988.jpeg74AA27D4-B826-461B-BC6A-48F6AB8BFE0B.jpeg D136E069-10E9-4978-8A7D-A10B14ED1CF7.jpeg

[apenland01]

I ended up buying some SS poker table cup holders. They have a flat piece that is used to slide under the edge of the table. I drilled 2 matching holes and stuck it under FF mount. I’ll probably put a 2nd on the other side but under the deck mount. I don’t want to drill any new holes.

Great idea!

[buster502]

Where did you find this one ?? Sounds like what I want to do too !!

bought the drink holders off ebay and hole saw from lowes

[buster502]

That's what I thought about doing but couldn't bring myself to drill a hole that size in my deck

i done my right in front of the drivers side rod locker,looks real nice,just make sure you buy a stainless drink holder and the right hole saw and it looks factory

[ParDeus]

I made sure to rivet a small bungee with a pinch adjuster to the outside of the cupholder, that way you can run down the lake without having to move your drink every time.

[KandKKustomz]

https://www.tacklewarehouse.com/Comf...-COMFCAN.html#

[Skunked again]

resized screenshot.png

I made this on a previous boat. Its a cutting board, cut to size, corners rounded. Drilled holes for the cup holders, slots for pliers. Elevated it off the deck, by use of plastic spacers.