Can anyone tell me the adapter cable i need to us the built in transducer on the ghost to a hds gen 1
Can anyone tell me the adapter cable i need to us the built in transducer on the ghost to a hds gen 1
9 to 7 pin adaptor. Available all over and online
NoCAL
2004TR-21X/2015 250 ProXS
2B112175
Thank you
NoCal, can you tell me what you need to go to a 12” Gen 2 Touch?
2019 Skeeter FX-21
250 SHO
Lowrance 16” Live & 12” Live
Ghost TM
The DI part won’t work, the 2d sonar might???? (I’m referring to the gen1 question above)
I haven’t tried, but it should.
2D sonar should work same as any other transducer but we won’t know until somebody tries it. Of course the DI won’t work.
NoCAL
2004TR-21X/2015 250 ProXS
2B112175
Not to steel the post . Also been trying to figure this out. have an HDS9 Gen2 touch, the DI and 2D works, good image, but cant get the temp to work and show on the display screen. I have it on local settings. Its set on this unit only. Am I missing a setting?
2006 Ranger Z20
2011 225hp Evinrude ETEC H.O.
26p Raker II SS prop
HDS9 gen2 at bow and HDS16 carbon on a precision sonar console bracket.
Units linked into outboard interface.
Precision sonar gauge relocation kit.
2) 8' power pole blades
101 lb 36v minn kota fortrex
Bob's 10" hydraulic jack plate
This is the one for the OP. For a Gen 2 Touch, I think you can plug it directly into the Structure port but I’m not sure about that. This is for units with analog temp. Like the OP and I think for Gen 2 Touch
http://https://www.lowrance.com/lowrance/type/accessories/chartplotter-fishfinder-cables-adapters/9pin-black-xdcr-to-7pin-blue-adapter-ef5edb7e/
NoCAL
2004TR-21X/2015 250 ProXS
2B112175
2006 Ranger Z20
2011 225hp Evinrude ETEC H.O.
26p Raker II SS prop
HDS9 gen2 at bow and HDS16 carbon on a precision sonar console bracket.
Units linked into outboard interface.
Precision sonar gauge relocation kit.
2) 8' power pole blades
101 lb 36v minn kota fortrex
Bob's 10" hydraulic jack plate