Results 1 to 11 of 11
  1. #1
    Member
    Join Date
    Feb 2018
    Location
    E.Bernstadt ,KY
    Posts
    213

    Keel Guard on an aluminum boat?

    Picked up an aluminum boat, and I'm wanting to add a keel guard. I would like to put an original Hambys, but I know they won't work, since not enough V to the front bow.

    I'm looking at the Hambys light duty and the KeelShield.

    On a 20' bought what length should I buy?

    Out of the two, which one would you select?


    I've also thought about having the Line-X keep guard, but I don't know of anyone in this area that does that on boat. I've seen them in FL, and they looked real nice.

  2. Member
    Join Date
    Mar 2015
    Location
    texas
    Posts
    831
    #2
    I have a keelshield on my xpress x19. Been on for 5 years now.
    2015 Xpress X19/ Yamaha VMAX 175 SHO

  3. Member alli ss's Avatar
    Join Date
    Jul 2004
    Location
    Greenbrier, Ar
    Posts
    7,925
    #3
    Keelshield on my xpress. Done it quite a few times with no issues

    xpress x19, 200ho G2, aluminum sawtooth cut prop, paper sack tackle storage, ugly stik pro team, color c-lector

  4. Member
    Join Date
    Feb 2013
    Location
    Boiling Springs, SC
    Posts
    750
    #4
    Put Gator Guard on my 198P . No issues . Easy install .

  5. Banned
    Join Date
    Oct 2017
    Location
    Newman, CA
    Posts
    5,165
    #5
    I've always wondered about the Rhino liner keel guard.

  6. Member
    Join Date
    Jan 2013
    Location
    Westerly,RI
    Posts
    2,018
    #6
    Quote Originally Posted by Upstate Gamecock View Post
    Put Gator Guard on my 198P . No issues . Easy install .
    Any pictures by any chance! Curious how it lays on the hull, would love to add one as i have a lot of gravel ramps around here.

  7. Charlie Don't Surf! King_Fish's Avatar
    Join Date
    Jul 2017
    Location
    Washington, PA
    Posts
    1,263
    #7
    Quote Originally Posted by javjoe View Post
    Any pictures by any chance! Curious how it lays on the hull, would love to add one as i have a lot of gravel ramps around here.
    X2
    2018 Ranger RT198p
    Charcoal Metallic
    Etec 150HP G2 HO
    24p Raker Stainless prop
    82# MotorGuide Tour Pro TM
    Fishes as good as anything out there, with the TM down...

  8. Member
    Join Date
    Feb 2013
    Location
    Boiling Springs, SC
    Posts
    750
    #8
    Don't have any pictures but I just laid it out in sun for about 30 minutes which made it more pliable and easier to work with . We went ahead with surface prep and didn't bring it inside until surface was ready to keep it from cooling off . Put it on and sealed around edges with clear waterproof silicone . Lays flat on hull with no air pockets . Can text pictures by week-end if somebody wants to PM their phone # to me .

  9. Member
    Join Date
    Oct 2014
    Location
    Oklahoma Resident Native Texan
    Posts
    1,027
    #9
    I had one done in Line-X. And they guaranteed it for life. Its still on there over 15 years later. Had it done for a show. Only thing I am sure of that won't come off. They color match also. Some of the others may work also.

  10. Arkansas Rally Moderator Arkyarcher's Avatar
    Join Date
    Oct 2009
    Location
    Hot Springs, Ar
    Posts
    5,622
    #10
    I bought mine with one on it and look what I found under it, later on when it started leaking a little.
    boatsplit-1.jpg

    It's better now but I don't think I will install another one.
    patch.jpg
    Gene Wilson

    2000 Xpress X19 Mercury 200
    Team PoorMansCustomLures

    Two wrongs don't make a right , but three lefts do.

  11. Member
    Join Date
    Aug 2004
    Location
    Pittsburg
    Posts
    266
    #11
    I put a Gator Guard on my RT 188 over a yr. ago and absolutely not problems.