SEAT HOLE PLUGS BACK IN STOCK

[DREWTICK]

GUYS I Have a new batch of seat plugs in stock with a slight upgrade, added an oring to seal the hole
it will take a day or 2 to update the site and I have a fresh batch of decals on the way, I should have all colors covered
seatplugs 1.jpgseatplugs 2.jpg

[Tom Edwards]

An o-ring is great.

[DREWTICK]

got them loaded up https://drewcraft.com/product/seat-pedestal-plugs/

[fishin couillon]

Are these harder to pull out since they have the o-ring?

[DREWTICK]

Are these harder to pull out since they have the o-ring?

I did that to make it easier and still seal the hole, the outer diameter is a couple of 1000s smaller bit with the oring it measures the same.

[wp0822]

Are these metal?

[drwaggs]

Picked up three of 'em! Never been a huge seat fan. These should work great at keeping 'things' out of those holes...

[DREWTICK]

Picked up three of 'em! Never been a huge seat fan. These should work great at keeping 'things' out of those holes...

all my seats have been hanging on the wall in the shop over 3 years

[DREWTICK]

Are these metal?

acetal homopolymer (Polyoxymethylene POM) is the ideal material in parts designed to replace metal. It combines low-friction and high-wear resistance with the high strength and stiffness such applications require. It provides a wide operating temperature range (-40 °C to 120 °C) and good colorability. also mates well with metals and other polymers and offers excellent dimensional stability in high precision molding.


acetal homopolymer offers higher tensile strength, stiffness, creep and fatigue resistance, and significantly higher impact resistance. The combination of these excellent mechanical properties in a single material allows for thinner, lighter-weight parts and shorter molding cycles with potential cost reductions.

[Tom Edwards]

I got mine the other day. Looks great and fits snug.

[Nowater2shallow]

i just found my birthday present

[wp0822]

acetal homopolymer (Polyoxymethylene POM) is the ideal material in parts designed to replace metal. It combines low-friction and high-wear resistance with the high strength and stiffness such applications require. It provides a wide operating temperature range (-40 °C to 120 °C) and good colorability. also mates well with metals and other polymers and offers excellent dimensional stability in high precision molding.


acetal homopolymer offers higher tensile strength, stiffness, creep and fatigue resistance, and significantly higher impact resistance. The combination of these excellent mechanical properties in a single material allows for thinner, lighter-weight parts and shorter molding cycles with potential cost reductions.

I already bought and received them. Thanks for the reply.

Great product.

[JackJ]

Awesome. Just sent you an order.

[km9e]

Got mine yesterday ... very nice bling to the boat!

[Captain98045]

I received mine Friday. They are so awesome! Thanks!!!!