Thread: Hull Blisters

Results 1 to 11 of 11
  1. #1
    Member
    Join Date
    Jul 2010
    Location
    Prairieville, LA
    Posts
    412

    Hull Blisters

    If the folks with older Tritons have not checked them for blisters I would encourage you to check. I have a 2008 TR 196 and had no indication there were any hull issues. After reading so much about it, I had it lifted and checked when having some trailer work done. The hull looks like it has cancer. There are areas of blisters that look like acne on a teenager. There are several places where the blisters have popped and glass mat is exposed about as large as a 50 cent piece. The biggest problem is at the outer board on the passenger side there are a series of gel coat cracks as long as 8" and they are intermittent for about half the bunk length. All of it is between the bunks and the hull. Nothing is visible when the boat is on the trailer. First repair estimate is approximately $4k.

  2. Member crank68's Avatar
    Join Date
    Mar 2011
    Location
    Kenly, NC
    Posts
    17,435
    #2
    I work on em and see it all the time. They look great until off the trailer....
    BULLET 20 XRD/250 Merc Sport XS
    www.ncboatguy.com

  3. Member
    Join Date
    Jul 2010
    Location
    Prairieville, LA
    Posts
    412
    #3
    Have you ever seen a hull delaminate because of water contacting the glass mat?

  4. Member
    Join Date
    Mar 2014
    Location
    South Louisiana
    Posts
    1,269
    #4
    Quote Originally Posted by Cajun Pop View Post
    Have you ever seen a hull delaminate because of water contacting the glass mat?
    Haven’t seen it, but heard it happens. Contact D and T fiberglass repair. They are in Livingston. May be able to find his contact info on the Louisiana board. Does top notch work. Just a heads up. Insurance and Triton will not help you.

  5. Member neo's Avatar
    Join Date
    Aug 2010
    Location
    Orange TX
    Posts
    1,638
    #5
    You could put a gorilla hull on it.
    Toledo fiberglass.
    2019 Vexus AVX 2080
    Evinrude G2 200
    Bobs Hyd. Jackplate, Dual power poles
    Aluminum trailer, polyurea flooring

  6. Member
    Join Date
    Jul 2010
    Location
    Prairieville, LA
    Posts
    412
    #6
    I have already emailed D&T and Toledo Fiberglass. Waiting on responses. May sell as is and let the buyer, if any, know the condition and approximate cost to repair.

  7. Member
    Join Date
    Dec 2013
    Location
    Ocala, Florida
    Posts
    1,969
    #7
    That is the route I took with my 2004 TR196. The repair was too expensive
    Brad Krone

  8. Member
    Join Date
    Mar 2020
    Location
    Prosperity,South Carolina
    Posts
    933
    #8
    A friend of mine z20 nitro is getting fixed this minute for same

  9. Member crank68's Avatar
    Join Date
    Mar 2011
    Location
    Kenly, NC
    Posts
    17,435
    #9
    Quote Originally Posted by Cajun Pop View Post
    Have you ever seen a hull delaminate because of water contacting the glass mat?
    Yes...
    BULLET 20 XRD/250 Merc Sport XS
    www.ncboatguy.com

  10. Member
    Join Date
    Dec 2004
    Location
    Bridgewater, NS
    Posts
    2,641
    #10
    Quote Originally Posted by crank68 View Post
    I work on em and see it all the time. They look great until off the trailer....
    Do you have to rotate the hull over for a proper repair, I would think so as working upright is far better than upside down on your back.

  11. Member
    Join Date
    Mar 2012
    Location
    Del Rio, TX
    Posts
    644
    #11
    Yes the boat is flipped. Grind, add glassmat then coat. Had it one two years ago.
    Attached Images Attached Images
    Last edited by 6BOOMER; 07-27-2020 at 12:11 PM.