I wanted trim handles that matched the spokes in my steering wheel so I turned a pair on my lathe. Started sanding with 400 grit then 1000, 1500, and 2000. Finally polished with tripoli and white compound.
I wanted trim handles that matched the spokes in my steering wheel so I turned a pair on my lathe. Started sanding with 400 grit then 1000, 1500, and 2000. Finally polished with tripoli and white compound.
Last edited by WranglerSS; 07-17-2020 at 07:15 AM.
Damn those look good...if you sold a pair what would price be
Murray State Alum
2007 Champion 210 with all the toys
Hmm, not sure. This set took a while to make since it was the first ones. Now that I know the process and setup I could probably make a set in a couple hours.Originally Posted by BloodRiverBandit
That is clean looking with the smooth details.
Roy
2020 Triton 18 Trx
Mercury 200 Pro XS V8
Bravo FS 24P Prop
Atlas 6” jp
Dual Humminbird Helix 10 MEGA SI
Minnkota Ultrex.
Reply With Quote