I received my Helix 12 MDI+ unit back from Eufaula with a new board. Everything works as it should almost and this unit is networked with a Helix 12 MSI+ and a Helix 9 GPS. The m360 is connected to the MDI+ with a Y cable connecting the transducer that came with the MDI+.
My issue is that the m360 intermittently displays waypoints, but they are not in the correct location. Almost 180 degrees off. The Helix 9 displays the waypoints correctly, but does not match up with the incorrect m360 display. I feel like there is a simple solution, but can’t think of what it is. Ideas would be appreciated.