My pull cable on my Ultrex (80 pound, 45 inch) broke today. Need to get a new one. Are there any good aftermarket ones?
Thanks,
My pull cable on my Ultrex (80 pound, 45 inch) broke today. Need to get a new one. Are there any good aftermarket ones?
Thanks,
TH Marine G-Force is a good one. Bobs Machine makes one too but i have no experience with it.
2015 Legend V20
2020 Mercury 250Pro XS 4stroke
14" Bobs Hydraulic JackplateLowrance Live 12" & Hummingbird Helix 12" Mega (Console)
Lowrance Live 12" & Humming bird Helix 12" Mega w/ Mega 360 (Bow)
Bass Boat Technologies Mounts
25P Bravo 1 FS
8ft Blade Power Poles
Yes and pay close attention on the insall. Make sure you use the washer provided and put it on the mount end of the cable.
Had a TH Marine on my Fortrex after breaking factory cords and was never happier!
Scott Inman
Do yourself a huge favor and get The Bobs machine shop "Big Daddy Handle"
Big D package
Big DBig D package
Big D package
Big D
The Big D – Trolling motor handle
Watch out that cable will break too ,I did it cracked my head on graph ,I pulled the pin it slides on and cut a piece of pvc slid it over pin for a roller
Mine broke a couple of months ago and I looked like Ike running from the front deck to the rear! Never fell, but I did some fancy footwork! I reused my cable, since the stop on the end of the cable is reusable also. Actually like it shorter as it won't get under my pedal now.
I went back to rope ,get a piece of spectra rope (Westmarine)
Roger Jenks Jr
2021 Bass Cat Lynx
250 Pro xs 4S Serial # 3B010758
I've broke two cables, fell on my butt both time. Now use para cord doubled up and no issues al all. Better than cable IMO.
Lake Norman, N.C./New Britain, CT.
An Khe 66-67