Results 1 to 2 of 2
  1. #1
    Member jacksonmj's Avatar
    Join Date
    Oct 2009
    Location
    Aurora, CO
    Posts
    636

    96 Erya BP101 Dash

    I know it’s a long shot but doesn’t anyone have an old dash that they did the conversion they’d like to sell. My RPM gauge and bilge pump isn’t working anymore and don’t feel comfortable taking the boat out in case something happened and I took on water.

    Second question how hard is the dash conversion for those that have done it especially the wiring part?

  2. BBC SPONSOR Bass Cat Boats's Avatar
    Join Date
    Jul 2004
    Location
    Mountain Home
    Posts
    15,070
    #2
    Have you checked the ground, voltage regulator also on the tach. It’s very common to loose a regulator on that year model in one brand.

    it’s a 1996, so it should be a BP-100 dash assembly and while they are good, issues can happen. The problem is often pumps or grounds. If there’s a fault code on screen it could be a $25 pump. You should have an unused accessory switch also that could power a bilge pump. Or two...