20200707_220709.jpg
This plug does not go to anything. It is in the bildge area around the pump. Curious as to what its purpose should be
20200707_220709.jpg
This plug does not go to anything. It is in the bildge area around the pump. Curious as to what its purpose should be
-2016 Phoenix 721 250 Pro XS
-Old Rig-2006 Triton TR-196 200HP Optimax
Might be a diagnostics port
Do you have the integrated wiring harness in your 721 ? If not that plug looks a lot like the Bilge Pump plug that plug could be there for an additional add on (when I ordered mine I got that option with the integrated wiring harness). I have a extra one on the shelf from Tim.
Steven Dendy-Spring Hill, KS
2017 Phoenix 721 PRO XP 250-PRO XS
Past Rides
07 Triton - TR-196 200-Opti
01 Triton - TR-21 225 HO Johnson
93 Javelin 379T 91 Rude Intruder
83 Tidecraft - Wildfire F/S 150 Black Max
The little white tag on the wire will say what it's for. Looks like the plug for an extra bilge.
The 3 wire that currently goes to the bildge is plugged into the factory pump. This plug is only a 2 wire. Maybe because it doesn't use the auto pump feature. I did not look at the white tag before I closed the hatch up. I also don't know what kind of wiring harness is in the boat as I bought it second hand. I know its the kind that irritates me as the auto bildge and my accessory port/USB isn't working for my backup/emergency pump.
-2016 Phoenix 721 250 Pro XS
-Old Rig-2006 Triton TR-196 200HP Optimax
Yea, the 3 wire should be the auto bilge and the 2 wire is an extra manual bilge. They just use the same wire harness whether you get it or not. Have you checked to see if your getting power to the pump? Could be a stuck float, especially if it works in manual mode. Check the breaker on the USB port
The manual switch works fine. I didnt test initially and just assumed I had a bad float or switch so a swapped a new bilge pump in. Guess what... no auto bildge. I felt stupid for not testing first. Also have checked the breakers as well for accessory port
-2016 Phoenix 721 250 Pro XS
-Old Rig-2006 Triton TR-196 200HP Optimax
It looks like you have the 9 series wire harness. Do you have the black box with the master cut off in the bilge? Sounds like the wire that should always be hot for the auto bilge isnt hooked up or something. I redid the wiring in my 721, and I thought it was a mess but once I got to looking it was easy to figure out what most of it was. It just wasnt put in there all that neat