I need a trailer pin that locks the swing away part. Any idea where to find one that will fit. I may have to cut my old one off. I know Ranger doesn’t sell it anymore. No key that will open and full of rust I assume
2004 trailer think it was produced in 2003 ...called Ranger parts and was on hold for 30 minutes had to hang up...
Thanks
Take a look at this one.
https://durasafelocks.com/collection...e-trailer-lock
2020 520L / 250 PRO XS 4S
Get the right size hitch pin. Lots of places have them
You will need a 5/8 in. pin.Originally Posted by bloodman
2020 520L / 250 PRO XS 4S
I have an 05 Ranger Trail. Ranger sent me the newest model which served the purpose. Waited 50 minutes for someone to answer at Ranger today.
I have called the last 3 days in a row and still yet to talk to anyone in parts dept.. I stay on hold so long it just hangs me up. They not that freaking busy !! they need some help or something
FYI - I bought the same one Ranger uses at Tractor Supply for about the same price.
2020 520L / 250 PRO XS 4S
DC, if you call at an especially busy time, try the service line in Springfield, which is 417-873-4555. Listed in the stickies above. — JC
John Clark — Findlay, Ohio
You can get a 5/8 pin at tracker supply with a handle and cotter pin attached.
__________________________________________________ __________________________________________________ _________________
Never stop believing and never stop chasing your dreams.
Galatians 6:9
www.kgfishing.com
USCG Licensed and Insured Fishing Guide - Lake Murray and Clarks Hill
It’s a good idea to keep a spare one in the truck that is a item that can disappear in the ramp parking lot.
The last one I bought was from Tractor Supply Store. 5/8"x 6"
Last edited by wmitch2; 07-13-2020 at 06:05 PM.
Ranger Boats / Mercury Motors
G Loomis Rods / Shimano Reels
Raymarine / MinnKota Ultrex
Garmin / Live Scope Plus
Pepper Jigs / Robo Worms
Troll Bridge / V-T2 Vents
Yep!!! My last one did. The new one I drilled out and put a pad lock in it.
Who the hell takes it off someone's trailer? Now I'm nervous...
2014 Ranger Z520C
2014 ETEC 250HO
2019 BW160SS
2019 90HP Merc 4S
2009 BW130SS SOLD
2008 25hp Merc SOLD
1987 Ranger 360v SOLD
1984 Mercury BlackMax 150hp SOLD
Just about anything that's not locked will eventually disappear at a ramp. It took me a few years to catch on and lost a wiring pigtail, swing away pin, one tail light and a draw bar pin. Now everything that can can be locked is locked.
2020 520L / 250 PRO XS 4S
no respect...good thing the ramp I normally go to is behind a locked fence (parking too).
...and that just keeps general public out.
2014 Ranger Z520C
2014 ETEC 250HO
2019 BW160SS
2019 90HP Merc 4S
2009 BW130SS SOLD
2008 25hp Merc SOLD
1987 Ranger 360v SOLD
1984 Mercury BlackMax 150hp SOLD
Looks like a smaller padlock will fit the lynch pin hole on the bottom of my trailer pin. Will start using that...would suck to have it taken while out on the water.
2014 Ranger Z520C
2014 ETEC 250HO
2019 BW160SS
2019 90HP Merc 4S
2009 BW130SS SOLD
2008 25hp Merc SOLD
1987 Ranger 360v SOLD
1984 Mercury BlackMax 150hp SOLD
Lock it or lose it.
2020 Ranger 521L Tour, 300 Mercury, 112 Minn Kota Ultrex
3 12" Helix Units, Mega Si, Mega Di, Mega 360, Garmin 8412 W LiveScope mounted on Rite Hite Turret.
I had that one, works ok. After a while the lock part can be a little touchy to get off.
This spring I bought BOLT Locks for the hitch and trailer coupler, I also ordered an extra hitch lock and had a stainless steel pin made for the swing away tongue. Now all three locks are keyed to the vehicle key, don't have to worry about forgetting the trailer key or carrying multiple keys.
2019 Ranger 212LS with a 2019 Mercury 250 ProXS 4-Stroke
Humminbird HELIX 10 MSI and HELIX 10 Chirp (side by side at the console)
Humminbird HELIX 10 MDI+ and HELIX 10 Chirp (stacked at the bow)
Minn Kota Ultrex 112lb with Humminbird MEGA 360
Dual Minn Kota 12' Talon with R&R Design Extended Emergency Ladder
Reply With Quote
