Results 1 to 4 of 4
  1. #1
    Member
    Join Date
    Feb 2020
    Location
    Wisconsin
    Posts
    58

    Pro Team 190 Rear Deck

    Is the rear deck on the PT 190 wood or aluminum? I am wondering because I will be installing rod holder bases towards the back. Also, how thick is the material?

  2. Member
    Join Date
    Apr 2016
    Location
    Austin, Arkansas
    Posts
    1,136
    #2
    Aluminum. Don't know thickness for sure but would bet it's probably .100. If you're so inclined you can get rod holders that go in the versatrack (but only on the left side).
    2018 Tracker Pro Team 190 TX
    115 Mercury Pro XS 4S

  3. Member
    Join Date
    Feb 2020
    Location
    Wisconsin
    Posts
    58
    #3
    Quote Originally Posted by Goldstar225 View Post
    Aluminum. Don't know thickness for sure but would bet it's probably .100. If you're so inclined you can get rod holders that go in the versatrack (but only on the left side).
    I would need them screwed to the deck for proper positioning on each side. These are for flathead fishing from the rear.

  4. Member
    Join Date
    Feb 2018
    Location
    Cataula, GA
    Posts
    1,602
    #4
    I just put new carpet on mine. Mine is a 2014 and assuming yours is similar. As Goldstar said, the back deck is aluminium. The starboard and port sides seem to fairly strong, not sure what thickness is. There is a separate piece that runs between the livewell and rear access hatch where the seat post is that is quite bit thicker then the sides.