My buddy wanted me to pour him some 3/16oz dart/bullet heads, but I cannot find a 3/16oz. Did they ever make them? Are they an older molds out of production? Any help would be great. Thanks.
My buddy wanted me to pour him some 3/16oz dart/bullet heads, but I cannot find a 3/16oz. Did they ever make them? Are they an older molds out of production? Any help would be great. Thanks.
We always just ground out a 1/8th ounce cavity or two.
Honora Primum Vel Nullum Omnin Honorem
Thank you. I’ll have to try that.
I would pour the 1/4 oz with some lead/tin/environmetal/bismuth mix.
Last edited by 21XDC; 07-06-2020 at 06:06 PM.
Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html
That's how I would do it.Originally Posted by 21XDC
Allen
Or buy a "Minnow Head Jig" mold from do it molds. They offer a few different ones in that size.
Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html
Do-it mold JB-7-48 ( 1/8 oz / 1/4 oz ) Bullet jig was the very first mold I bought years ago
The 1/4 oz size jig head weighs lighter than advertised and actually comes in at about 3/16 oz after pouring with a 3/0 Gami light wire hook
Thanks for all the good information.
@KLS2020 thank you for that info.
Reply With Quote
.jpg)