Results 1 to 9 of 9
  1. #1
    Member
    Join Date
    Feb 2019
    Location
    Florence NJ
    Posts
    55

    4 blade ideas 2018 Z520C

    I’m currently running a Fury 3 25p. Hole shot isn’t good with 2 guys and tournament load. Break over is about 3600 and top end is only 5400-5500. I’m running it at 3 on the atlas plate which is 10 on the gauge. If my measurements are correct, that’s about 2.5 to the pad. I can get higher wot but only with the Livewell a empty, half tank of fuel and no tackle. I saw 5600 and 70mph before I loaded it up with tackle. Top end isn’t as important as good handling. I fish a lot of tidal stuff and can rarely keep her to the pins anyway. Any help would be great.

  2. Member
    Join Date
    Feb 2019
    Location
    Florence NJ
    Posts
    55
    #2
    I forgot to mention that I’m running 250 merc pro xs 2 stroke. Also experienced some serious walk when she’s aired out.

    Thanks again.

  3. Member
    Join Date
    May 2006
    Location
    MARKSVILLE
    Posts
    433
    #3
    Quote Originally Posted by Capt Smith View Post
    I’m currently running a Fury 3 25p. Hole shot isn’t good with 2 guys and tournament load. Break over is about 3600 and top end is only 5400-5500. I’m running it at 3 on the atlas plate which is 10 on the gauge. If my measurements are correct, that’s about 2.5 to the pad. I can get higher wot but only with the Livewell a empty, half tank of fuel and no tackle. I saw 5600 and 70mph before I loaded it up with tackle. Top end isn’t as important as good handling. I fish a lot of tidal stuff and can rarely keep her to the pins anyway. Any help would be great.
    24 pitch bravo 1 xs

  4. Member
    Join Date
    Oct 2017
    Location
    St. Peter, Minnesota
    Posts
    3,293
    #4
    Been very pleased with the overall performance of my Razor XL. I dropped one pitch coming from a 3 blade Raker II... talked to Mark, service and support was top notch. Boat holds load very well and drives like it’s on rails. Worth a look
    2019 Ford F-150 Platinum (3.5EcoBoost/10spd)
    **Listed FOR SALE**2014 Ranger Z119C w/ Evinrude ETEC 225HO Running Croxton’s Razor 4XL 25P
    Helix 12 Mega G2N’s with Ultrex
    Think like a fish, no matter how weird it gets

  5. Member
    Join Date
    Jan 2005
    Location
    Red Oak Va.
    Posts
    10,597
    #5
    25 bravo xs

  6. Member
    Join Date
    Feb 2019
    Location
    Florence NJ
    Posts
    55
    #6
    Is there any truth to it taking almost a year to receive a Razor from time of order?

  7. Member
    Join Date
    Feb 2019
    Location
    Florence NJ
    Posts
    55
    #7
    Will Mark respond to email or is it better to call? Anyone know that have dealt with him?

  8. Moderator 21XDC's Avatar
    Join Date
    Sep 2004
    Location
    Westland Michigan
    Posts
    63,433
    #8
    I always suggest to call Mark or SaVonna ... Info in the bottom of my posts.

    Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html

  9. Member
    Join Date
    Aug 2018
    Location
    1000 Islands, Ontario
    Posts
    967
    #9
    I bought a Razor 4 last summer...took about a month to get it and definitely worth it. Mark/Savonna have been excellent to deal with. This prop is 3mph slower top end than my 3 blade FXP, but way, way more fun to drive thru the entire rpm range. Great hole shot/stern lift and much better handling in rough water.
    2002 Skeeter ZX200
    2018 200SHO