93sv and 93UHD linked via nmea2000: not seeing waypoints shared

[Bug Pro]

I have a 93sv at console and 93UHD at bow. They are nmea 2000 networked connected but still not seeing waypoints shared. What am I doing wrong/missing?

[DR. DROP]

Need to be networked through Ethernet cable. Nmea is for connecting sensors-GPS pucks.

[fishin couillon]

If the 93sv is NOT the plus unit it will not share with the UHD. If a Plus model then like mentioned above, need ethernet cable.

[Bug Pro]

Ok. Thank you! I’ll work on getting them linked via Ethernet. The 93sv is the plus.

[Bug Pro]

Hope y’all don’t fuss at me for this being a dumb question but how do you connect via Ethernet? There is a power, nmea 2000, sonar/transducer and panoptix slot on the units. That is all...so how do I connect?

[fishin couillon]

The panoptix port is the ethernet port......

[DR. DROP]

This https://www.russellmarineproducts.co...551-00-gar.htm
They have a 6,20 and 40ft.
Then on both units select Nav Info>Manage Data>User Data Sharing.
That should fix you up.

[Bug Pro]

Gotcha....Thanks fellas! So this is a new boat and came rigged from Vexus. Why would they even NMEA 2000 network the bow unit? I have the console unit networked to the motor to get motor hrs etc but not seeing the need to network the bow with the console.

[fishin couillon]

Well if you have a gps puck, temp sensor, heading sensor, etc. It can be used by the front unit also.....vex us may not know about ethernet sharing.....but just keep it as its there already....