-
spun 2 prop hubs
Last two trips out I melted two prop hubs on my 2013 Etec 225 what is causing this?
-
Moderator
Dfi motors burn hotter and cleaner. Higher exhaust temps melt rubber pressed in hubs. Consider a different hub/prop.
-
Might want to talk to Mark Croxton - I had a Mariner that would melt the hubs - he drilled some holes in my prop and alleviated the melting...
-
My cousin just went through this on his 2011 225 etec. It ended up being the cooling line that goes the hub was plugged with debris. Took it to 4 different shops and no one could figure it out. I posted here and got some tips for him and now he is fixed.
Here is the link to my thread.
http://www.bbcboards.net/showthread....608&highlight=
Last edited by Buck456; 07-02-2020 at 10:10 AM.