Results 1 to 9 of 9
  1. #1
    Member
    Join Date
    Jul 2004
    Location
    Salemburg, NC
    Posts
    435

    03 201 PRO XL Livewell Rocker Switch Needs Replacing

    Any suggestions on where to buy a replacement rocker switch for the livewell. 20A 12V 5-pin on-off-on w/light. Current switch works in the up position but not the bottom. Thanks in advance.

  2. Forensicator Javelin389's Avatar
    Join Date
    Jul 2004
    Location
    Lebanon, TN
    Posts
    12,701
    #2
    New Wire Marine seems to be the place for switches. But since it's working in one direction, check the fuses behind the panel.

  3. Member
    Join Date
    May 2019
    Location
    North Carolina
    Posts
    549
    #3
    I have bought from rocker switch pros. Just ordered all new actuators so I can actually read them.
    I like Big Bass, I cannot lie

  4. Member
    Join Date
    Mar 2005
    Location
    Elko Ga
    Posts
    704
    #4
    found em on amazon and got cbailey (I think that was his name) on here to make the switch covers to my specs on what they say for my old 201. Worked out great.

  5. Member
    Join Date
    May 2007
    Location
    Colonial Heights Virginia
    Posts
    5,103
    #5
    Do you have any pictures of the switch covers?
    Thanks

  6. Member
    Join Date
    Jul 2005
    Location
    Norfolk Virginia
    Posts
    3,314
    #6
    Does your livewell have a timer? Does that work?

  7. Member
    Join Date
    Jul 2004
    Location
    Salemburg, NC
    Posts
    435
    #7
    The timer works. Which ever lead I attach to the top output terminal works. The bottom terminal doesn't. The 5th terminal is just a bridge for the negative. I think I'll have to get a 4 pin and put the negatives both on the same terminal.

  8. Member
    Join Date
    Jul 2004
    Location
    Salemburg, NC
    Posts
    435
    #8
    Ok, it's not the switch. Livewell works in the timer position. The constant on position isn't working. Has to be the wiring between the switch and the pump. Any ideas? Any one else had to deal with this before?

  9. Forensicator Javelin389's Avatar
    Join Date
    Jul 2004
    Location
    Lebanon, TN
    Posts
    12,701
    #9
    Did you check the fuses behind the panel?