Results 1 to 7 of 7
  1. #1
    Member
    Join Date
    Jul 2009
    Location
    Eagle River WI
    Posts
    292

    No power at the switch

    Have a princecraft with a 115 Evinrude. I have no power to the starter switch or trim control at the console or at the motor. All accessories at the console are working fine. I find no damaged wires. Changed out the switch , no change. Would a bad emergency cut off switch at the console cause this issue? Don’t see any fuse box either
    thanks

  2. Member ELGIN's Avatar
    Join Date
    Sep 2007
    Location
    K-PAX
    Posts
    2,828
    #2
    There is a main fuse on the engine, which 115 do you have?
    RUSTY63 in a Shiny Green Jacket.......

  3. Member
    Join Date
    Jul 2009
    Location
    Eagle River WI
    Posts
    292
    #3
    Not sure, how do I find that out?

  4. Member
    Join Date
    Jul 2009
    Location
    Eagle River WI
    Posts
    292
    #4
    It’s a 1995

  5. Member ELGIN's Avatar
    Join Date
    Sep 2007
    Location
    K-PAX
    Posts
    2,828
    #5
    Model number would help but here are the fuse locations on both the cross and loop 115 for 1995.

    Crossflow fuse holder attached to the wire harness

    20200630_203456.jpg


    Loop 115 attached to the electrical cover.

    20200630_203143.jpg
    Attached Images Attached Images
    RUSTY63 in a Shiny Green Jacket.......

  6. Member
    Join Date
    Jul 2009
    Location
    Eagle River WI
    Posts
    292
    #6
    Found a blown fuse, don’t have one tonight; but thanks! Hope it’s the problem

  7. Member
    Join Date
    Jul 2009
    Location
    Eagle River WI
    Posts
    292
    #7
    Thanks Elgin!, Blown fuse right where you said it was. Everything back and running. Love this forum!