Currently running a Fury 24P and it does fine, planes well and good top end. Would like to try a 4 blade. We do a little skiing and tubing so think a 4 blade would be good. And where to buy? I think someone last time I asked recommended one of the Bravo's.
2017 Phoenix 819
2016 200ProXS, s/n 2B359849, Mod 1200P73BD
Rothwell Marine is great with Merc props, can advise on your setup, is a Phoenix dealer and has a great exchange program and is a BBC Board Sponsor.
Probably a 24" Bravo XS
Just some feedback, did get good advice and a great price on a Bravo from Rothwell. Just have to confirm my RPMs and will likely buy one from them.Originally Posted by Wild Card
2017 Phoenix 819
2016 200ProXS, s/n 2B359849, Mod 1200P73BD
If you don't mind me asking, what is your top end speed with your current setup. I just put a 24 fury on my 19ft Stratos/200 Opti ProXS. I can spin the 24 to 5550 rmp - 65 mph. Seems kind of slow in my book.
My tach is busted and I rarely pull up the VesselView, but if memory is correct, I think I'm between 56 and 5700RPM at close to 70. I have a hydraulic plate too which helps stay in that sweet spot. At less than the max 5750 a 25 Bravo XS was recommended. Said it would run good in the thick summer water but approach the limiter at WOT in winter.
2017 Phoenix 819
2016 200ProXS, s/n 2B359849, Mod 1200P73BD
Thanks for the update.
Reply With Quote