Results 1 to 3 of 3
  1. #1
    Member
    Join Date
    Oct 2012
    Location
    Brownstown, indiana
    Posts
    106

    Blinking recir key

    Over the weekend, while fishing a tourney my auto/man button stopped and started blinking. The pump quit working as well. Also the pump out pump will run but no water will come out? Any suggestion?

    thanks

  2. Member
    Join Date
    Feb 2011
    Location
    Denton
    Posts
    298
    #2
    The pump has a short or it got over loaded being jammed with a piece of debris or something. Power up the keypad and hold the blinking button in for about 10 seconds and see if it resets the tripped breaker in that circuit. As for the pump out is the red spray head pulled “out” in the live well? Pushed in it will recirc pulled out it will pump the live well out. “If the pump is working ok”

  3. Born on th Llano Estacado Tx Champ's Avatar
    Join Date
    Jun 2004
    Location
    Abilene, TX
    Posts
    20,814
    #3
    Along the line of what Barbless said, if it's not jammed, it could be that the bushing in the pump has gone bad or water intrusion into the pump motor. I don't know what Legend used for pumps, but it should be a replaceable cartridge if it won't run, sounds like it's struggling or squealing.