Results 1 to 4 of 4
  1. #1
    Member
    Join Date
    Jun 2020
    Location
    Canton,Tx
    Posts
    2

    1995 skeeter zx300 setup

    I got a 95 300zx with a 95 200hp xri. Slow out of the hole and only get 58-58 mph
    Prop to pad 3.5"
    Prop that came on it is a high 5 25p I think this is most of my problem. I'm looking for suggestions on what to put on it?

  2. Pat Goff
    Join Date
    Jun 2004
    Location
    Seadrift TX
    Posts
    10,942
    #2
    25 Yamaha M would be first choice, Merc Tempest would be second. I might be a little high on pitch numbers, that's a big boat for a 2.5 motor. But...skeets want all the bow lift they can get, they don't run until you have some air compressing under them.
    I'd call Josh at Steves prop on Lake Fork, they've done thousands of what you've got, and can dial you in right away.
    Pat Goff

    Two degrees from center
    of nowhere.
    Smithwick TX.

    [SIGPIC][<a href=http://www.bbcboards.net/image.php?type=sigpic&userid=583&dateline=1498828542/SIGPIC] target=_blank>http://www.bbcboards.net/image.php?t...828542/SIGPIC]</a>

  3. Member
    Join Date
    Jun 2020
    Location
    Canton,Tx
    Posts
    2
    #3
    Thanks I talked to him and he suggested it needed a 23

  4. Pat Goff
    Join Date
    Jun 2004
    Location
    Seadrift TX
    Posts
    10,942
    #4
    Yeah, after thinking about it that sounds right.
    Pat Goff

    Two degrees from center
    of nowhere.
    Smithwick TX.

    [SIGPIC][<a href=http://www.bbcboards.net/image.php?type=sigpic&userid=583&dateline=1498828542/SIGPIC] target=_blank>http://www.bbcboards.net/image.php?t...828542/SIGPIC]</a>