As you can see I need to get this welded but does anyone know how the diamond plate is attached? It’s coming loose so I need to secure it. The diamond plate over the fenders have rivets but not the one in the picture. Thanks
As you can see I need to get this welded but does anyone know how the diamond plate is attached? It’s coming loose so I need to secure it. The diamond plate over the fenders have rivets but not the one in the picture. Thanks
Usually just glued or double sided tape
What boat model is this for i didnt know they put the side guides on them like that? But the diamond plate on the steps is adhesived on.
Roy
2020 Triton 18 Trx
Mercury 200 Pro XS V8
Bravo FS 24P Prop
Atlas 6” jp
Dual Humminbird Helix 10 MEGA SI
Minnkota Ultrex.
Triton 216 FishunterOriginally Posted by TritonTRXV8
I had the same problem with mine .. it’s all clear adhesive.. make sure you look at all of them .
had 2 come off the first your . Next year I was washing my trailer . I went around and the rest just popped
all right off .. found that half the glue didn’t stick ..triton sent me a new one that came off while driving .. get some good adhesive , I took a puddly knife
and scrapped all the extra glue off trailer and plates ..took wire wheel to the back off the too scuff them up....they glued them
with smooth side .. nothing to stick too.
be generous with the glue then clamp or heave objects for couple days till they set up..
Mercury Pro Team
2017 Triton 20 TRX Patriot
250 Opti Max Pro XS
Twin 8' Power Pole Blades
2 Solix 12 gen 3 , with mega 360
Wonder if the super duty 3m double sided tape would work better than dealing with adhesives? No dry time and that stuff sticks really good.
Roy
2020 Triton 18 Trx
Mercury 200 Pro XS V8
Bravo FS 24P Prop
Atlas 6” jp
Dual Humminbird Helix 10 MEGA SI
Minnkota Ultrex.
Since I redid mine .. no issue and stuck really well ..
Mercury Pro Team
2017 Triton 20 TRX Patriot
250 Opti Max Pro XS
Twin 8' Power Pole Blades
2 Solix 12 gen 3 , with mega 360
I ordered a brand new Marine Master Triton trailer and told them "NO DIAMOND PLATE", its only for looks and a place for water to collect and start rusting the trailer.
I do not miss the plate at all and never had my foot slip off.
My last trailer the diamond plate was riveted on, i just drilled out the rivets and took em off. I had to paint the rusted areas under the diamond plate.
Reply With Quote
