2019 Nitro Z20 w/ Merc 250 Pro XS 4s. Currently running a Fury 24p 3. Looking to try a 4 blade to see if I like it better. Happy with performance of the current prop, so what would be a good 4 blade prop alternative?
2019 Nitro Z20 w/ Merc 250 Pro XS 4s. Currently running a Fury 24p 3. Looking to try a 4 blade to see if I like it better. Happy with performance of the current prop, so what would be a good 4 blade prop alternative?
If fury 4 its pitch for pitch.
Is there a better option 4 blade then the fury?
27 bravo 1 xs forget the fury
Bravo 1 XS are for lighter hulled boats.
2016 Phoenix 921 ProXP Mercury 250 ProXS
wrong bravo 1 xs are for heavier hulled boats
I have a 2020 Z20/250 V8. I put a Bravo 1 FS 25 pitch on it. Very happy with performance. Jumps on plane, handles well, good top end and is a good prop for pulling a tube I found out this weekend.
What rpm are turning the 25 bravo at
2020 Nitro Z20 250 Pro XS
5900 rpms in the summer heat. About 3.5 inches PTPOriginally Posted by Brewerbass
Bravo xs 25 or 26
Thanks for all the input
whats your best top end with the bravo 25?
70mph is best so far in this CA heat. Still have some chinewalk I’m working on. My goal was a good all around 4 blade prop and not so much concerned with top speed. I was getting 72 with the factory Fury 24 3 blade but I like the Bravo much better. Only 2 props I’ve tried so far. Good luck
Last edited by Bosco122; 06-27-2020 at 08:44 AM.
I have a similar thread, the Bravo was recommended for me. Rothwell Marine gave me a good price and advice.
2017 Phoenix 819
2016 200ProXS, s/n 2B359849, Mod 1200P73BD
Reply With Quote