-
hub removal
hello i just got my 2020 Nitro z21 300 pro xs atlas hydralic plate 2 10 ft talons 24 fury 3 i cannot seem to get boat to not bounce from 70-75 i have a 26 tempest plus to try but i cant figure out how to remove hub from fury i saw the split ring removed it but cannot drive hub out this seems to be different than the hd hubs i ran on my opti 250 pro xs with 1.25 fat shaft is this hub not removable do i need a different hub kit what is the deal with this hub almost like its pressed in
-
Maybe you have an SSR hub. They are difficult to remove.
-
whats the trick to removing it
-
Member
A press or a big hammer, I would just buy a new racing hub
-
You just have to beat on it. I used a sledge hammer and a steel pipe the first time. Ken Smith fishing on you tube shows how to drive it out. I would never have done that with out seeing it first. Whats needed is a puller or a press.
-
i put it on my 12 ton press came right out it is a ssr hub
-
I'd try some rubber lube on it when you put it back in.
Reply With Quote