just did the latest updates to my live units and transducer and now it showes no source for the live sight. any ideas???
just did the latest updates to my live units and transducer and now it showes no source for the live sight. any ideas???
Turned everything off after the update and then turned everything back on? Soft and then hard resets are your next option.
NoCAL
2004TR-21X/2015 250 ProXS
2B112175
The LIVE SIGHT transducers can be activated in the ADVANCED FUNCTIONS.
Ok I activated it still no source. Then did soft and hard reset still no source.
Mine was the same way. I found that if I go to the sonar page and change the input to channel 1, then go back to live sight it would work. I’m not sure but I believe you have to have multi source sonar turned on for it to automatically find the live sight transducer. At least that’s what made my setup work.
Well I tried that tonight but still no source.
Turn on the unit and unplug the live sight transducer and then plug it back in.. See if you get it to initialized on the screen, if so wait 1 or 2 mins. (on the live sight panel screen)
Jason Gilstrap / Lowrance Pro Staff
i tried that this morning and it said initializing live sight but then went to no source.?????
is your LiveSight up to date to?
Jason Gilstrap / Lowrance Pro Staff
it happened when i updated it. it was working fine until then.
I’ve called lowrance and stayed on hold for 1 hr 52 min and got disconnected. Submitted my problem online on Wednesday and still no response. Anyone having this issue? Or know about how long the wait is to get things resolved? Thanks