Have a new Helix 12 to put on the bow. Looking at using a TH marine Wave Tamer mount in front of the foot control well. Looks like it will partially block my cup holder even if I put it all the way forward as far as it will go. No biggie but wanted to know/see what other X19 users are doing up front with their electronics before I start drilling. Thanks.
spark
Try a dek-it mount
2013 Xpress X19
I made my own out of a 1/4'' flat steel bar. Tools I used were a drill press, vice, angle grinder and a hammer. I then painted it with some black rustoleum. It was like 30ish dollars and an hour and a half of labor to make it instead of paying around $100 for it.
Just another option
'06 Xpress X19 TS | 150 Yamaha VMAX
Very cool!!Originally Posted by FlipSide
I made my own out of a 1/4'' flat steel bar. Tools I used were a drill press, vice, angle grinder and a hammer. I then painted it with some black rustoleum. It was like 30ish dollars and an hour and a half of labor to make it instead of paying around $100 for it.
Just another option
Thanks for the feedback guys!
20190413_130818.jpg20190413_130818.jpg
20190413_130818.jpg
I also went Dek-it. 3+ years with zero issues.
Reply With Quote