Anyone with a Z21 running a Garmin trolling motor? I am wondering if the pedal fits in the factory recess? The dimensions seem like they would be close.
Also, what shaft length are you running, the 50" or 57"?
Anyone with a Z21 running a Garmin trolling motor? I am wondering if the pedal fits in the factory recess? The dimensions seem like they would be close.
Also, what shaft length are you running, the 50" or 57"?
No with a z20 or z21 has a Garmin TM?
I just put one on a z521 and the pedal fits perfect. 50" is plenty.
Can you post a picture?Originally Posted by crazyju
When you mounted did you screw the pedal down or leave it loose?
Did you need to drill new holes in the bow to mount it or did it match the holes for the old TM?
Last edited by jjbz21; 07-01-2020 at 11:27 PM.
I left it loose, It is a snug fit and is not going anywhere.
I installed the Force the other day. I am debating on whether or not I should bolt down the foot pedal. Its a tight fit in the foot well but not that tight.
Has anyone had it come out when running? I like the idea of being able to move it around if needed but if there is a risk it may fly out on plane I will bolt it down.
Pedal fits fine. May want to put spacers in to raise the pedal assembly, but other than that it's fine.
You want to screw it down. I got to see one first hand sliding down the HWY at 80 mph. That or stow it while traveling.
2024 Phoenix 818, Mercury 175 (3B414035) Trick Steps, 3 Garmin 106 SV,s, LVS 34. BoatEFX dual bow mount. Ionic 12V 125AH, 2 12V 100 ah LiTime’s for the TM. Minn Kota 345 PCL charger,
I screwed it down without spacers for now. How big of a spacer did you use? What did you use for a spacer?
Reply With Quote