Total Scan Transducer

[tracer1]

Can anyone post some pics of the transducer installed on the Tritons?

[buster502]

i put a hole shot plate on mine and mounted my transducer there,got the angled one from shield saver

[Murph44]

459BD71C-29DB-4086-87C3-37FD5222F77D.jpeg

mounted right under jack plate .. factory install..

[tracer1]

Just made a hole shot plat for my Atlas. Will try to install it tomorrow & either flat mount my total scan or build a bracket to mount on the holeshot plate.

Thanks guys for the info & pic.

[TritonTRXV8]

I have humminbirds but i mounted mine under the holeshot plate also. I didnt care for how the stock bracket was so i made my own. Works great there zero issues.
05F1A218-08E3-40C4-AF07-0E18D0831D43.jpeg F43FB935-40B4-4D89-9160-EADE116FF113.jpeg

[tracer1]

[QUOTE=TritonTRXV8;11162254]I have humminbirds but i mounted mine under the holeshot plate also. I didnt care for how the stock bracket was so i made my own. Works great there zero issues.

Wish I had the tools to make the bends like that. Nice bracket.

[Bob G.]

Mounted a HBird SI transducer to the hole shot plate. Mine isn't as fancy as Roy's!! Had a metal shop cut and bend a piece of aluminum. I drilled the holes and mounted with SS hardware and nylock nuts.

[TritonTRXV8]

[QUOTE=tracer1;11164666]

I have humminbirds but i mounted mine under the holeshot plate also. I didnt care for how the stock bracket was so i made my own. Works great there zero issues.

Wish I had the tools to make the bends like that. Nice bracket.

Thanks! Im lucky the school district i work at has an awesome welding program and alot of equipment i have access too.

[tracer1]

Bob's looks good also. I just hast no way to make the bends.

[Bob G.]

Bob's looks good also. I just hast no way to make the bends.

I got mine cut and bent at a metal shop for 20 something bucks.

[tracer1]

Think that's what I will do also.
Thanks

[eds triton]

Sweet