Results 1 to 2 of 2
  1. #1
    Member
    Join Date
    Mar 2006
    Location
    Olean, NY
    Posts
    542

    2006 ranger trailer z21 measurements

    hey guys, would some one be so kind to take a couple of measurements for me,i have a 2006 trailer that hauls a 2006 z21,the support brackets that hold the bunks are pretty wasted, actually ripped a whole bunk off loading the other day,coud someone give me the dimensions off the frame to the top mounting hole on the support itself,the problem I have is the height is different on the two outside (shorter bunks)than the two inside(longer bunks),of course I only measured the support on the outside bunks before I cut them off,and there is a difference,could probably get right underneath the lower unit pretty easy and get it, thank you

  2. mikesxpress
    Guest
    #2
    Tom I have a 2009 Z21 Intracoastal and the bunk brackets are all the same. Here is info on SS brackets vs the cheesy galvanized steel ones.

    KDAT boards. *Not crap from Lowe's!

    Gatorbak bunk covers.
    Gatorbak stainless steel bunk brackets.

    http://gatorbak.com/gatorbak-bunk-brackets/

    You will never need to fool with the bunks again.