I have a MG Tour 109 and is a little older. The prop shaft is slightly bent. I really don’t what to spend much money on it but how much would it cost to fix it ? This is the prop shaft, not the trolling motor shaft.
I have a MG Tour 109 and is a little older. The prop shaft is slightly bent. I really don’t what to spend much money on it but how much would it cost to fix it ? This is the prop shaft, not the trolling motor shaft.
Sounds like you need to change the armature, probably cost around $200
With a credit card, I don't know of any way to straighten a bent shaft w/o additional damage.
Comanche20 (Don)
2008 Ranger Z 20, 225 RUDE
Ultrex 45/36/112
2 Birds
2020 F150 LIMITED Eco Boost
How difficult is it to change the armature? I never got into the lower unit of these.
You need to change the armature , because the armature is the prop shaft. If you have never seen the inside the troll motor then it is advisable to take it to a shop to get it done. You could ruin the brush card and the wires to it. then you will have more issues.
BBC Sponsor since 2006: (870) 773-3474
Mon - Thrs 8am - 5pm Central
Friday 8am-12pm
Garmin Certified Dealer and Installers: Call us for all your Garmin Electronics needs!
ASC for: Garmin, Lowrance, Minnkota, Humminbird, and Powerpole.
[SIGPIC] http://www.jonestrollingmotor.com
[/SIGPIC]