05 TR21 XD Jackplate

[germs07]

I have a 2005 TR21 XD with a Merc 250XS on a manual jackplate. I am looking to get a hydraulic jackplate to help with shallow water take off as well as top end. Currently with the long shaft motor I need between 6-7' of clearance before blast off. Problem is the lake i normally fish is only 6-8' in its lower basin and full of weeds. What size hydraulic jackplate would be best suited for this boat? I have done some research and been 8 to 10" plates. I am looking at a Bob's but Atlas inst out of the question. I am running a tempest plus 25P prop but that obviously can be adjusted.

. I am open to all suggestions.

[crank68]

So you have a 25” mid on a bass boat...

[germs07]

That came on the boat when I bought it. Should i be looking at a different prop?

[crank68]

I wouldn’t worry about the prop until you can get your PTP in a normal operating range.

[g352nv]

How you going to raise it that high with that shaft?

[richdwn]

I own a 2005 triton Bass boat what is a tr21 xd sorry for being dumb