So I hit a stump and now have no steering. When I turn the steering wheel I can see the cable moving around the helm but the motor doesn’t turn. The motor turns easily by hand. Could hitting a stump cause the cable to break inside the sheath and I feel like when I turn the motor and turn the steering wheel, wherever the break is, the ends would bump into each other but they don’t. It’s in the water and I don’t have a trailer so I’ll be working on it in the water. Plan on taking the cable loose from the motor at first and see if I can pull the cable out from there to see where the break is. The lower unit and prop look fine, the steering wheel didn’t jerk out of my hands, I’m just confused how the cable broke. ( if that’s even what’s wrong). Any one else have similar situation or suggestions?