i have a 2000 90 hp ser ot331577 model 1090412yn
i noticed that my spark advance lever screw isnt going back to the stop plate its about 1/4 from it
would that cause a loss of rpms? i notice that i am only getting about 4900 to 5000 rpms lately
if so what do i need to do to get it to go on back to the stop thanks
i used the search tool on here and saw where it might be the wires . well i went back and checked and found that the wiring harness going to the trigger was pulled tight i moved the wires and it now touches the stop so
i will see if it works
that will sure enough hurt it acceleration and top rpm
.................................................. ...the scariest thing in life is the unknown ...................................
well gained 200 rpms running 5000 now at wot
Reply With Quote