what kind of speed can you expect
x19 with yamaha 150
what kind of speed can you expect
56-60
Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html
I would expect mid 50s I get 60 to 64 with a hpdi 175.
tim tell what you like and what you dislike about your x 19 how does it do in rough water, how stable , storage anything you can help me with considering purchase of one also what interior did you get
57 - 63 depending on hull thickness .100 vs .125/weight and setup.
What year is your setup and what engine/ 4 stroke 2 stroke are you running?
Last edited by pa.X19; 05-28-2020 at 07:58 PM.
I run 55 to 58 on my H18 .100 hull with F150 yammie. 6’’ plate. 21 tempest plus.
I thought all of the X bass series were .125 hull?
Yes, the X series have .125 hull.
2020 X19 Pro w/Yamaha 200 SHO has bad porposing problem. Not happy with mine I just bought.
Might be of some help http://www.bbcboards.net/showthread.php?t=1055619Originally Posted by MulberryMan
Gene Wilson
2000 Xpress X19 Mercury 200
Team PoorMansCustomLures
Two wrongs don't make a right , but three lefts do.
I took my x19 with 175 sho out today for first time, it would porpose with trim alway down between 2000 and 4000 while doing break in, unless you wot and trimmed up then is would get on pad and run 5800 at 58 mph but my water pressure was only showing between 8 and 10 , took it back to dealer they were going to get with xpress tomorrow and see if they can fix , they thought it may be too high i am running a sho 22 pt prop which is what xpress recommended any one have any idea what might be problem. arkyarcher at what speed did your boat porpose
Last edited by BBW; 06-29-2020 at 06:36 PM.
i got the same set up, except a Merc Opti 150hp. Used to get the same results as Ryan till some nabob dinged up the hull on 17,228 stumps and roughed up the prop on some rocks.
It's been a great boat.Yeah, i am the nabob.....
There are other threads on BBC that are critical of the PT props that come with the Xpress boats. Some good things said about TurboFXP and Merc Tempest Plus. Might wanna take a looksee at those comments...
Actually I had the plowing water problem from a dent right before the transom on the bottom and had to fill it in with Bondo(still needs a little work)
Gene Wilson
2000 Xpress X19 Mercury 200
Team PoorMansCustomLures
Two wrongs don't make a right , but three lefts do.
2001 X19, Running 57mph, 5900+rpm with a 99-200 Yamaha VMAX, performance reeds, stuffer plates. PTP about 4", 6" hydraulic JP. 23" solas scorpion. Thinking she should run better than 63. Curious on what the pad shape should be?? Flat? Slight concave tunnel?? It runs ok, but seems more nose down than it should be... even when top end, fully trimmed.
Last edited by Smallie_Hawgin; 06-30-2020 at 10:09 PM. Reason: Added details
You need to work on your weld beads on the back edge to get the nose where you want it
xpress x19, 200ho G2, aluminum sawtooth cut prop, paper sack tackle storage, ugly stik pro team, color c-lector
The two chines on the outside edge have a slight turn down, the other corners are all pretty flat. It does not appear to be from wear, rocks etc... I could easily fill those voids to flatten them out, I guess. Otherwise, she's pretty smooth... Was thinking a 24P four blade Turbo to help with RPM, bow lift and control a bit... I dunno... Nothing desperately needed at this point, but sure would like to see what she can really do...
At the bottom of the Xpress Forum page change the view to beginning and there should be several threads about the bottom and waterlogged foam, you could be dealing with one or the other.
Gene Wilson
2000 Xpress X19 Mercury 200
Team PoorMansCustomLures
Two wrongs don't make a right , but three lefts do.
I have a 2012 X19 with an F150 on 6" plate. I get 55mph on gps with passenger full tank of fuel and all my fishing gear. I have done no modifications except adjusting PTP.
53-55mph with a 150 and passenger, 1/2 tank of fuel. the older x boats were .100 like I have and yes I have/has the standard water logged foam. A lot of it was removed when I added the bracing. I find that most are shall we say enthusiastic when it comes to top speed on their rigs. If mine wont do what I say every time then I don't post it as top speed. CJ
2002 X19 200HP OX66 HO Vmax,HPDI lower, it lives, thanks Hydro Tec.
I am seeing 54ish as a top speed on mine with a 4 blade 23p powertech
'06 Xpress X19 TS | 150 Yamaha VMAX
Reply With Quote
.jpg)
