Livescope mount for ultrex?

[dwoodfin]

Is there a mount that will attach to the ultrex in any way but be independent of the trolling motor shaft and operate by hand control? I'm finding out very quickly that the transducer needs to be mounted separately from the shaft in order to stay on a target....unless in very calm water, which is rarely the case. I've seen some mounts that attach to the boat, but I was wondering if there was one being made to attach to the ultrex.

[keeferfish]

Looking myself for Minn Kota options but not getting any responses. I have done a bunch of internet research and found the below options. I would love for someone with a great looking set up to respond. Good Luck. Leaning towards the poleducer myself.

https://shut-up-and-fish.com/the-poleducer-1/

https://texasfishingforum.com/forums...ws-suggestions

https://fishingspecialties.com/

https://seelite.myshopify.com/collec...ansducer-mount

https://thebassboatladder.com/shop/o...ansducer-mount

[fishin couillon]

Here is one of our board sponsors...

https://thebassboatladder.com/

[ddement]

IMO the low pro mount with the hose is the best manual one out and I have tried several of those above.

[fishon396]

Thanks for the links

[dwoodfin]

Thanks guys

[ajw18]

Here is one of our board sponsors...

https://thebassboatladder.com/

This is what I have and it works very well.

dwoodfin, IM incoming.

[fishon396]

Cornfield crappie gear has a couple livescope mounts also one other a motor on it.

[keeferfish]

Here is one of our board sponsors...

https://thebassboatladder.com/

It's what I decided on, ordered yesterday. Thanks all!

[Great Scott]

low pro rod rack has a very nice Ultrex mt. LDS