24 fury 4

[champ210]

Any issues with this prop being worked to a 23 pitch. I could use a couple 100 rpms on a 18 521L Ranger with 250XS 2 stroke

[rcraigrrt]

Just be sure you send it to a GOOD prop guy... the Furys metal is different to work that any others from what I understand. If they aren’t familiar with the Fury, they could make it worse!

[Brewerbass]

Believe they are making a 23 fury 4 now right from merc

[lpugh]

That rig should pull a 24 to about 5900 and about 72 maybe a little better I think
5900 to 6000 is where that motor develops peak HP

[champ210]

I've been playing with it but so far about 5500 to 5600 is all im getting. Ill keep playing with it. I need more seat time on water that lets me air it out. Hard to do on great lakes

[Yatesville Junkie]

I have a 520L with a 4 stroke and I’m spinning the 24 fury 4 to 6050rpm at 70.3 mph. Jack plate set at 7-8 on the gauge and about 1/2 to 3/4 trim.

[champ210]

Are you talking about the atlas gauge that goes from 1 to 20? If so I've been running to high

[Yatesville Junkie]

Are you talking about the atlas gauge that goes from 1 to 20? If so I've been running to high

Yes the atlas gauge is what I’m going by

[Squire]

I had a fury 4 25p worked by one of the best and it threw an ear in less than 15 hours of usage (my second fury 4 that has thrown metal without EVER hitting anything). So I would sell and buy a new 23p and NOT have a Fury worked....Once they are worked, the warranty is NULL AND VOID.

[fearme24]

Mark Croxton told me he could not down pitch a Fury 3 blade. "They will not gain RPM".

Not sure about 4 blade.

[lpugh]

Well there is one guy that can, I have a 26 that reworked that gained me 150 RPM runs 50 rpm more than my 25

[MengRanger]

Bottom line, they throw blades if worked or not.