Has anyone ran a Fury 4 blade 24 on a 920 2 stroke? If so, what was your speed and prop height? Thanks
Has anyone ran a Fury 4 blade 24 on a 920 2 stroke? If so, what was your speed and prop height? Thanks
Not quite the same, but I run a 25 fury 4 on a 920/2 stroke 250. I've seen 73 with 2 people and medium load, but it probably has more in it. I can take my hands off the wheel and no chine walk. Prop height is 3-1/4" below pad. If I raise it any more, the prop blows out on takeoff.
Steve Sendelweck
Phoenix 920/Mercury 250 ProXS
How many plugs do you have in it?
Two large hole plugs and all the other holes open. I tried plugging some holes to stop the blowout, but the holeshot got slower so I just lowered the motor until it would hook up. Some people will say the fury 4 is too slow on this boat, but my handling and rough water ride improved so much, I'm happy giving up a few mph.
Steve Sendelweck
Phoenix 920/Mercury 250 ProXS
I have my buddy 4 blade fury 25 and it comes up great. He has every other hole plug. The plugs have holes in them. I can only turn 5680 rpm and 70.5 mph. His prop needs to worked.