Results 1 to 5 of 5
  1. #1
    Member
    Join Date
    Jul 2012
    Location
    LAKEWORTH, FLORIDA
    Posts
    34

    Before Moving Trailer

    I'm ready to take the 2006 hpdi vmax 200 in for service. The tandem EZ loader trailer hasn't been moved for 3 years. What should be done before I hookup ?

  2. Banned
    Join Date
    Feb 2012
    Location
    Ohio
    Posts
    4,888
    #2
    Just do a general walk around inspection.

    Look to see if your tires are weather checked or have any cracks in the sidewalls .Check air pressure in tires. Check that brakes work and are not locked up and check that your lights all work.
    If it has been sitting for 3 years loaded. Don't be surprised if the tires have flat spots and may thump for awhile going down the road.

  3. Member
    Join Date
    Nov 2018
    Location
    Texas
    Posts
    1,971
    #3
    if it hasnt been run for 3 years get ready to spend some money.

  4. Member
    Join Date
    Mar 2012
    Location
    Pelham, GA
    Posts
    2,004
    #4
    If it has positive-lube axles I would squirt some grease in the hubs to drive any moisture out, I might also jack it up and spin the wheels to see how they feel. Maybe check all the lug nuts are tight.
    Mercury 2002 200hp Carbed Saltwater
    OT566776
    2002 Cape Horn 22' Bay

  5. Member
    Join Date
    Jan 2007
    Location
    Kansas City, KS
    Posts
    1,529
    #5
    How far you going to go with it? Would make big difference in how much i'd repair. Especially if it was going right back to where it was.
    Joefish
    2007 Ranger 178DVS
    Evinrude ETEC 150

    <*)}}}><