8ft pp bolt size on JP

[nitro 90]

I currently have one 8ft pp on my Z-7 and looking to get another one. I have 8” slide master and used existing bolts to attach pp bracket. Do you change existing bolts out to different size if so what size?
thanks 😊

[Hydrilla Gear]

the Power Pole brackets come with longer bolts... They are 1/2-13.

Do not add the Power Pole bracket and re use the OE slidemaster bolts. They will be too short.

[nitro 90]

the Power Pole brackets come with longer bolts... They are 1/2-13.

Do not add the Power Pole bracket and re use the OE slidemaster bolts. They will be too short.

ok so they are 1/2 inch by 13” long?

[KandKKustomz]

ok so they are 1/2 inch by 13” long?

1/2 x 3.25" you will remove the factory slidemaster outer plate. Correct bracket for your boat would be the s-2-2. Either Port or starboard depending what side you already have your single pole.

[nitro 90]

1/2 x 3.25" you will remove the factory slidemaster outer plate. Correct bracket for your boat would be the s-2-2. Either Port or starboard depending what side you already have your single pole.

thank you

[KandKKustomz]

thank you