Results 1 to 9 of 9
  1. #1
    Member
    Join Date
    May 2020
    Location
    Sebring, FL
    Posts
    338

    88 ranger 363v front pedestal???

    I just got this boat and I need a front pedestal for it but I have no clue what kind i need. Can anyone please help? Thanks

  2. Member
    Join Date
    Jan 2012
    Location
    Houston
    Posts
    1,165
    #2
    You looking for a mounting plate or...?
    90 Shadow 20' Mod V w/ 200 Merc - Total resto and loving it!
    Here's my build from cap-off to boat in the water.
    http://www.bbcboards.net/showthread.php?t=336645

  3. Member
    Join Date
    May 2020
    Location
    Sebring, FL
    Posts
    338
    #3
    No sir the base is there I just don't know how to tell if its a screw in or another kind. I have read there 1.77 diameter

  4. Member
    Join Date
    Aug 2017
    Location
    Hillsboro, NH
    Posts
    3,067
    #4
    Should be a Springfield Spring-Lock http://www.springfieldgrp.com/produc...ip-lock-series

    1990 Ranger 362V Yamaha Pro-V 150
    Old Town Predator MinnKota

  5. Member
    Join Date
    May 2020
    Location
    Sebring, FL
    Posts
    338
    #5
    Ok so its lock series i just dont know the diameter i went to bass pro but the ones that they have have a very small black diameter at the bottom i can see thats to small. I called ranger they want $140 plus $150 for the seat.

  6. Member Crankb8's Avatar
    Join Date
    Jun 2004
    Location
    Shawano Lake, WI
    Posts
    1,072
    #6
    I have an 88 360v and I used the spring lock in mine and it works fine. Mine are actually the screw in type bases too, but the spring lock will lock into them.
    "Cast Everything in the Best Light Possible"


  7. Member
    Join Date
    May 2020
    Location
    Sebring, FL
    Posts
    338
    #7
    Well i went to bass pro but I just dont know which one to try? They all looked to small in diameter.

  8. New England Forum Moderator twitch's Avatar
    Join Date
    Mar 2005
    Location
    New Bedford, MA
    Posts
    14,934
    #8
    go to the springfield site they may even have what you need in the scratch and dent section for a discount...
    1990 374V Ranger Still kickin' bass after all these years

  9. Member
    Join Date
    Aug 2017
    Location
    Hillsboro, NH
    Posts
    3,067
    #9
    Sorry I can't be of more assistance. I had a 3/4 pin power-pedestal from my old boat, so after installing new pedestal bushings in the Ranger, I got a pin adapter for the front base... then the lift cylinder quit So I ended up getting a manual-adjust pin pedestal, and can't move the seats around the boat as needed

    1990 Ranger 362V Yamaha Pro-V 150
    Old Town Predator MinnKota