Thread: Livescope setup

Results 1 to 3 of 3
  1. #1
    Member clayton bigsby's Avatar
    Join Date
    Dec 2011
    Location
    Arlington,TX
    Posts
    32

    Livescope setup

    I have a 2017 tracker pro 170, just bought a livescope and was curious on what would be a good mount placement for the black box. Any info will appreciate thanks!
    1978 hydrostream vandal comp
    2011 hydrostream venom comp
    1994 bullet 20xd
    1985 ranger 340v
    2017 xpress xp7

  2. Member
    Join Date
    Dec 2012
    Location
    Paris Landing at Ky Lake
    Posts
    2,461
    #2
    I have a Triton tin and I mounted mine under the drivers console. I originally had it in a storage compartment in front of the console but moved it. I just felt better having it where it could get better air flow instead of in the storage compartment with a lot of stuff piled up around it. I also mounted it on 3/4” standoffs so it could get air to the bottom of it. It may not matter but I just figured better airflow couldn’t hurt.

  3. Member
    Join Date
    Apr 2012
    Location
    CADIZ, Ky
    Posts
    1,650
    #3
    I know this wont apply to your boat.
    My Lund has a panel at the bow to mount
    a graph in. Instead of a graph, I put the
    black box behind the panel. I then mounted
    a Lowrance graph and my Livescope on a
    Cornfield crappie double mount on a bracket
    straddling the TM peddle.
    The transducer for the LS is on a seperate mt
    by LOW PRO ROD RACK. It moves independently of the TM.
    It made for a very neat installation w/o all the dangling cables
    and wires that you see on a lot of LS installs. LDS
    Last edited by Great Scott; 05-21-2020 at 09:31 AM.
    Larry D. Scott Retired KY Water patrol/F&W
    www.greatscottshooters.com

    2008 TRACKER TV 18 w/150 Mercury 4S
    MK Ultrex 80lb, 102 Garmin Live scope
    and a UHD93SV Garmin on the bow.
    UHD 93SV at the console.