Results 1 to 4 of 4
  1. #1
    Member
    Join Date
    May 2009
    Location
    Grant Valkaria
    Posts
    340

    Recessed trolling pedal drain

    For those of you that have installed a recessed trolling pedal try, how did you do the drain on it? I’ve done a search but none of the installs I have seen said anything about a drain. I am looking at putting the recessed tray in my 2003 pt 185.

  2. Member
    Join Date
    Dec 2018
    Location
    San Antonio
    Posts
    410
    #2
    Mine drains right into the hull.

  3. Member rtlgator's Avatar
    Join Date
    Jun 2012
    Location
    Gainesville Fl
    Posts
    2,545
    #3
    Same here as far as where it drains, I did drill additional drain holes at each corner of tray...

  4. #FRB
    Join Date
    Jan 2012
    Location
    Little Rock, AR
    Posts
    10,337
    #4
    My factory tray didn't have a tube to route it towards the bilge so didn't bother using the tubing that came with my new one that was needed to fit the Ultrex pedal. In other words, I wouldn't worry about it.
    2023 Xpress H18 with 115 SHO and Powertech NRS4 21p
    8" Bob's Action Jack
    Garmin Echomap 12, 10, 9, and LVS34 networked with Netgear Switch
    Ultrex
    Trick Steps and Ramp N Clamp
    Pulled by a 2016 single cab HEMI Ram

    Treat others like you want to be treated when on the water EVEN WHEN IN A TOURNAMENT! No fish is worth having a confrontation because you cut someone off or came in on top of someone.