Help on How to take apart 920 dash shroud

[NY29T]

The search function isn’t working for me . I am taking off the lowrance at the console and putting in a hbird.


couple of questions

1.do I have to take off all the screws to take the shroud off?
2.How do I get the little black caps off without breaking em?
3. After I take the dash off do I have to take off the power shroud or will I have access to what I need ?

[NY29T]

Ok just discovered they weren’t hinged plastic caps .

[DREWTICK]

Ok just discovered they weren’t hinged plastic caps .

they used to be hinged https://drewcraft.com/product/screw-button-caps/

[920screaming250]

im taking my shroud off also..putting a lower guage shroud ..dont like the flush mount..keep us imformed,good luck

[DREWTICK]

I usually find some reason to take mine off at least 3 or 4 times a year

[NY29T]

Whelp. Found out they are hinged . Small flat head and some patience pops em off. Changing electronic brands and I’m gonna go on a limb and say Phoenix puts on the top cap after they install alllllll electronics! Kinda sucks to take out old electronics and now i can’t take out a lowrance transducer mounted at the transom without cutting the cord because i cant fit the input between the top cap and hull! What the heck Phoenix?! I removed as much rubber caulk as I could and it’s still not nearly the room needed to remove the plug :(

[haus9393]

I would just leave the lowrance stuff in the hull and pull
your new brand and install the puck next to it. Plenty of room for multiple transducers.

[Dam0007]

There’s a adapter from I believe motor guide that will work to use the Lowrance through hull ducer on a humminbird. Prob won’t get chirp. Def look into that before you go cutting cords!!! Then all you have to do is run the SS.

[GBhoss]

It will pull thru eventually. Mine got stuck right at the shifter and I had to take that off in order to get my hand in to get the connecter un-stuck. New one pulled thru just fine. I also took out the switch panel for better access.....