Yamaha replacement prop

[Chummer]

I need a new prop for my 250 V-Max hpdi. Have a Yamaha T1 27p 3 blade now. Any suggestions on replacements?

[21XDC]

It helpsto know how your boat performed with this prop. Rpms at trimmed out full throttle, holeshot, GPS speed, motor height, water pressure, what boat and model, if you carry a normal load or different etc. What you feel is important or lacking in your set up etc

[W.O.T]

is it a new HPDI?? I had to get a new SHO... anyway I went with a 26Turbo
I get 72mpg at 56-5700 rpms

[Bahala]

What 21XDC said. However, I had much better results with a 25p T1 with my HPDI. The 27p was ok for extremely light loads on my boat.

[Chummer]

is it a new HPDI?? I had to get a new SHO... anyway I went with a 26Turbo
I get 72mpg at 56-5700 rpms

It's a 2005 V Max.

[Chummer]

It helpsto know how your boat performed with this prop. Rpms at trimmed out full throttle, holeshot, GPS speed, motor height, water pressure, what boat and model, if you carry a normal load or different etc. What you feel is important or lacking in your set up etc

My first bass boat. 2006 Stratos 201 pro xl. Slide master Jack plate. Not sure how to measure height. Gps speed top out at 68 mph at 5700 rpm with full load and two people 25 gal. Of fuel. Hole shot seems slow to me from seeing other boats.

[Chummer]

What 21XDC said. However, I had much better results with a 25p T1 with my HPDI. The 27p was ok for extremely light loads on my boat.

Thank you for the info.

[zcomanche21]

I just put a Tempest Plus 25 on my 2005 250 Hpdi and it out performs the Yamaha 25Tl.

[onewalker]

depending on plate and load, I would think a 25-T1 Yamaha VMAX or a Tempest Plus 25 would be very good on that motor. I just sold a 2006 HPDI of my 06 skeeter 20i and the 25-T1 was excellent all around for that motor. My buddy runs an 04 HPDI and the 25-T1 also performs excellent on his skeeter zx225.