X19 prop

[Catchbass]

What are you fellows running for a prop on the x19 with euiYamaha 150 four stroke.

[21XDC]

I'd be running a 22P Bravo1 FS. A 21P Rev 4 might be another good choice.

[RyanJ]

I have an H18 with F150 Yamaha. 21 tempest plus should be here this weekend. I know not the same as an X19 but fairly close to same setup really. I can let ya know how it performs.

Is the consensus 4 blade is the way to go on these setups?

[21XDC]

The big 4 blades make the boat ride and handle like a glass boat 2 ft bigger.

[CJ1]

The big 4 blades make the boat ride and handle like a glass boat 2 ft bigger.

This^^^^Bravo or Trophy. Trophys always ran good on my boat. 2 different engines 3 different lower units. CJ

[RyanJ]

Not to hijack this thread....but would a 21P Merc Rev 4 fit my F150 Yamaha gearcase of 4.25'' ??

[21XDC]

Are you sure you have the small gearcase? The Bravo1, Fury3, Fury4, Tempest Plus, Yamaha T1, Marks Razor line, Rev4 all have the same prop barrel/tube size.

[RyanJ]

Gearcase size might be the wrong way to word this??...the prop barrel/tube size measures 4.25. This would be the 4.75'' gear case my bad!

[1Holeshot]

You can run a 4.25" barrel prop with a blow out ring. Lots of guys run a Trophy plus which is 4.25".

[alli ss]

I run a promax with a blowout ring